Fixed a bug where the position of the last piece in a bar was incorrectly calculated in some particular cases.
Real Cut 1D 11.12.4.3
June 10th, 2025Real Cut 1D 11.12.4.2
June 5th, 2025Fixed a bug related to the number of columns in Statistics|Waste tables.
Simple Cutting Software X 2025.04.30
April 30th, 2025Fixed a memory leak.
Allow exporting of results for all solutions as table in xlsx (Excel) format. Previously, in version 2025.04.28.3, the results were able to be exported in CSV format only.
Real Cut 1D 11.12.4.1
April 30th, 2025Existing (saved) projects must be run again (from the Start button) because some information is saved differently in the new project format!
Fixed a bug which shows an message error when the Length column is not set when importing from Excel/CSV. In such case no data are imported to Parts or Stock from now on.
Add the Price column for Disposed and Reused waste tables.
Introduced the function to export the entire solution (all bars) as CSV with one info (bar, piece, waste) per row. This is available from the Save button (which has a table on it) of the Results main toolbar.
Fixed a bug affecting fractional numbers validation.
Shows angles on graphical solution. No angles are shown is all are 90 degrees!
Shows the project file name in the Project | About window.
Shows the list of pieces for the currently selected bar in tabular format (1 piece per row). Available from the Tabular button on the main Results toolbar.
Shows the top and bottom position of each piece in the Tabular window. This is important when you have angles. If all angles are 90 degrees, you may hide the Top position columns.
Fixed a crash which appears in rare cases after using the import from Excel window.
Do not enable all Parts or Stock after a paste operation. The state (Enabled or Disabled) of a row is preserved after paste.
Simple Cutting Software X 2025.04.28.3
April 28th, 2025Reintroduced the function to export the 2D solution as CSV with one info (piece, waste, cut) per row. This is available from the Save button (which has a table on it) of the Results main toolbar.
Introduced the same function to export the 1D solution as CSV with one info (piece, waste) per row.
Fixed a bug when exporting labels and material name (of 1D solutions) containing ” or ; characters to CSV.
Simple Cutting Software X 2025.04.24.0
April 24th, 2025Fixed a bug with export to CSV of labels and materials name containing ” or ; characters
Also export label of pieces in Statistics | Summary tab.
Fixed a bug which did not allow pieces with Width = 0 to be imported from CSV. (Note that 0 Width is allowed for 1D pieces).
Specify the exact waste type (Reused or Garbage) when exporting Statistics to CSV files.
Real Cut 1D – angles for stock
April 21st, 2025[work in progress]
We started working on a function that will allow user to enter angles for the Stock pieces too. Also, the computed waste will have angles (currently the waste has 90 degrees at both ends).
More details soon …
